Pressure Transmitters
The series V pressure transmitters are suitable for the most demanding process environments and they cover all pressure ranges required in the industry.
The excellent temperature behaviour, many housing alternatives and the possibility to own user interface are common features for the series V transmitters. High speed sensor response time available 1ms even less.
You communicate with transmitter via Satron-pAdvisor software and HART -modem.Calibrate, configure and diagnose the transmitters easily using Satron-pAdvisor software.
Products
|
SATRON Pressure transmitter VGMeasuring Range: -0,1...+25 MPa Adjustability: 0-1,4 kPa...0-25 MPa |
|
Satron high speed pressure transmitterResponse time = 1 ms
Primary output: •Full Hart® features
•28Hz update rate (typical transmitter)
Secondary output: •Configurable
1.Fast pressure (1000Hz
update rate, Dead time 0.6ms (best case) 1.1ms typical
2.“Fast” pressure – average
pressure (35ms)
3.Temperature |
|
SATRON Pressure transmitter VBMeasuring Range: -0,1...3 MPa Adjustability: 0-4 kPa...0-3 MPa |
|
SATRON Pressure transmitter VLATEX Intrinsic Safety Certification No. : DNV-2007-OSLATEX- 1346X Measuring Range: 0...+15 MPa |
|
SATRON Pressure transmitter VTAtex Directive (94/9/EC) Satron Instruments Inc. complies with the ATEX Directive. Measuring Range: -0,1...+100 MPa |
|
SATRON Pressure transmitter VTeMeasuring Range: -0,1...+100 MPa Adjustability: 0-4 kPa...0-100 MPa |
.jpg)
|
SATRON Pressure transmitter VVH VVF VVPMeasuring Range: -100...+500 kPa Adjustability: 0-4kPa...0-0,5 MPa |
|
SATRON Pressure transmitter VVFeMeasuring Range: -100...+500 kPa Adjustability: 0-4 kPa...0-500 kPa |
|
Condensate pot CF64In steam flow measurement special condensate pots are installed in the immediate vicinity of restricting organ. The connection pipes from the restricting device to the condensate pots are full of steam, and from the condensate pot to the meter full of condensate. The condensate pots must be mounted in such a manner that the liquid levels are the same in them.The function of the condensate pots is to condensate steam into a liquid (e.g. to protect the transmitter from heat, to prevent dribbling), to keep the liquid levels unaltered with overflow and to collect air. The condensate watertransmits the pressure to the transmitter, so that the transmitter itself is not in contact with steam. |
|
SATRON VLe Pressure transmitterStarting price : $1,300.00 |
Datasheet for VG pressure transmitters